Topic: Optimizing the Locust! (Read 62298 times)

Takiro · « **Reply #75 on:** February 02, 2022, 05:07:10 PM »

You could also go to a Medium Pulse Laser too.

LCT-4S LOCUST

Mass: 20 tons
Chassis: Bergan VII Modified Endo Steel
Power Plant: LTV 160 XL
Cruising Speed: 86 kph
Maximum Speed: 130 kph
Jump Jets: None
   Jump Capacity: None
Armor: 1s/StarSlab Standard Armor
Armament: 1 Defiance B3M Medium Laser
   2 Holly SRM-4s
Manufacturer: Defiance Industries
   Primary Factory: Furillo
Communications System: Garret T10-B
Targeting and Tracking System: O/P 911

OVERVIEW
   The LCT-4S is the direct descendant of the LCT-1S and the 3S who followed that in 3049. This new design has been completely optimized with modern technology by Bullrun Concepts for the best possible performance. This ‘4’ series model which is now entering production on Furillo has been welcomed by Defiance Industries and some within the reassembling Steiner El-Caf. However, certain Lyran traditionalists who are perhaps the most reluctant to accept any such ‘new Ultra-light’ designs have been easily the most vocal critics of the entire upgrade process. Some assert that the 3S was solid enough and further investment should have been made in more effective heavier ‘Mechs which could in theory push back against the Clans. While such disapproval was expected certain elements who are seeking to undermine the Federated Commonwealth alliance and the recently concluded Martial Accords have cited the development of the 4S specifically as part of their increasingly harsh political rhetoric. Led by Duke Ryan Steiner of Porrima this potentially subversive group has been thus far been stymied by the Archon’s full-throated endorsement. Backing her words with actions Melissa has directly slated the immediate assignment of this new Locust to specific Lyran units. Only time will tell who will ultimately triumphant in this growing war of words.

CAPABILITIES
   Like its sister Four Series designs the 4S uses the Bergan VII Modified Endo Steel chassis that was originally developed for the LCT-3S. Mating this readily available skeletal structure with the newly manufactured LTV 160 XL was expertly carried out by Bullrun Concepts of Solaris VII. This enabled the best possible weight savings that the Locust could benefit from at this time for maximum design capability. There were older components from the LCT-1V that have been retained like the four tons of 1s/StarSlab Standard Armor and the electronic systems. Defiance did upgrade the centrally mounted Medium Laser with their own model and choose two Holly SRM-4s to provide the main firepower. This move away from the Streak models of the 3S can do more damage or heat if Mechwarriors choose to utilize inferno rounds. Most preferred this exchange despite the loss of accuracy not to mention the semi-modularity of the weapon mounts. This allows for rapid swaps of the arm mounted missile racks and even switching of the central mount to alternative energy weapons which includes TAGs. To facilitate this possible substitution ten Double Heat Sinks were included on the 4S, that like the 4D, makes it impossible for the BattleMech to overheat. Engine damage combined with external fire from inferno rounds or flamers unless extreme will not produce negative consequences for this Locust.

DEPLOYMENT
   Two new units currently assembling on Tharkad and Bolan were the first to receive the new LCT-4S. The Steiner Huscarls and the Bolan Scouts are both attempting to build on the proud Lyran traditions of the Stealths and Tamar Tigers. These elite regiments expertly fielded such light BattleMechs long ago and Archon Melissa Steiner-Davion has decreed that their high-speed tactics shall return to the reforming LCAF once more in these latest formations. Duke Ryan Steiner backed by other traditionalists have used these plans as fodder for their own propaganda. According to them fool hearty policies like this will result in further deaths for Lyran Mechwarriors who will be increasingly sacrificed to the Clan juggernaut.
   These LCT-4S designs might not be the first to see battle however as some have been routed to friendly mercenary unit accustomed to using such light ‘Mechs like Eridani Light Horse. The Deneb Light Cavalry of the AFFC has also received a shipment as of this writing and as both commands are serving in the remainder of the Tamar March on the Clan border it is likely they will see action first. Significant foreign sales have also been scheduled in the future for both the ComGuards and the Rasalhague Kungsarme who are rebuilding following the Clan invasion. Limited sales have also been slated for the AFFS and the St. Ives Compact who are also looking to augment their forces as well.

Type: LCT-4S Locust
Technology Base: InnerSphere Level 2
Tonnage: 20 tons

Equipment                           Mass
Internal Structure:          EndoSteel            1
Engine:            160 XL            3
   Walking MP:         8
   Running MP:         12
   Jumping MP:         0
Heat Sinks:            10 (20)               0
Gyro:                              2
Cockpit:                           3
Armor Factor:            64               4

            Internal Structure      Armor Value
   Head            3            8
   Center Torso           6            10 / 2
   R/L Torso         5            8 / 2
   R/L Arm         3            4
   R/L Leg         4            8

Weapons and Ammo:      Location      Criticals   Mass
SRM-4               Right Arm      1      2
Ammo (SRM) 25         Right Arm      1      1
SRM-4               Left Arm      1      2
Ammo (SRM) 25         Left Arm      1      1
Medium Laser            Center Torso      1      1

Cost = 2,512,000 C-Bills

Bradshaw · « **Reply #76 on:** February 02, 2022, 05:14:41 PM »

That gets into your rear you're feeling sore in the morning

Would do same with ammo. A TAG might work

Hominid Mk II · « **Reply #77 on:** February 02, 2022, 06:20:38 PM »

For both the LCT-4D and the LCT-4S concepts, I think I'd halve the quantity of ammo, add CASE protection for what remains and add another half-ton of armor. Won't really make a lot of difference to combat effectiveness, but it could make the difference between life and death for the pilot.

Ice Hellion · « **Reply #78 on:** February 03, 2022, 03:34:17 PM »

Quote from: Takiro on February 01, 2022, 03:53:45 PM

but there is also a new group along the Taurian border. The Citizen for Davion Purity (CDP) are very wary of Taurian involvement with the LCT-4D and have repeatedly cited heavy raiding by the Concordat in the wake of the Landmark Incident as a reason to stick with ‘native designed Davion’ products.

I think they are more in the Periphery border (the one not bordering the Taurian Concordat) and weren't they focusing more on Davion-Steiner?

Ice Hellion · « **Reply #79 on:** February 03, 2022, 03:35:45 PM »

Quote from: Bradshaw on February 02, 2022, 05:14:41 PM

That gets into your rear you're feeling sore in the morning

Would do same with ammo. A TAG might work

Or a MASC!!!

But what else did you expect from an Ice Hellion?

Takiro · « **Reply #80 on:** February 05, 2022, 09:11:20 AM »

Quote from: Ice Hellion on February 03, 2022, 03:34:17 PM

Quote from: Takiro on February 01, 2022, 03:53:45 PM
but there is also a new group along the Taurian border. The Citizen for Davion Purity (CDP) are very wary of Taurian involvement with the LCT-4D and have repeatedly cited heavy raiding by the Concordat in the wake of the Landmark Incident as a reason to stick with ‘native designed Davion’ products.

I think they are more in the Periphery border (the one not bordering the Taurian Concordat) and weren't they focusing more on Davion-Steiner?

FM Federated Suns says differently, in fact under the Warren CMM their infantry brigade commander is suspected of having ties to the group.

Quote from: Ice Hellion on February 03, 2022, 03:35:45 PM

Quote from: Bradshaw on February 02, 2022, 05:14:41 PM
That gets into your rear you're feeling sore in the morning

Would do same with ammo. A TAG might work

Or a MASC!!!

But what else did you expect from an Ice Hellion?

Don't worry, will get there soon Ice Hellion.

Takiro · « **Reply #81 on:** February 05, 2022, 09:12:54 AM »

LCT-4K LOCUST

Mass: 20 tons
Chassis: Bergan VII
Power Plant: LTV 160 XL
Cruising Speed: 86 kph
Maximum Speed: 130 kph
Jump Jets: None
Jump Capacity: None
Armor: Durallex Nova Ferro Fibrous
Armament: 4 Martell Medium Lasers
Manufacturer: Bergan Industries
   Primary Factory: Dieron (refits only)
Communications System: Garret T10-B with C3 Slave and Guardian ECM Suite
Targeting and Tracking System: O/P 911

OVERVIEW
   The fall of Alshain during the Clan Invasion left the Draconis Combine without any Locust production lines. With the threat remaining and hundreds of these Light ‘Mechs still in-service House Kurita was very interested in possible upgrades. When the Martial Alliance approached its membership with Bullrun Concepts LCT-4 variants the DCMS was intrigued. The Dragon faced a unique set of circumstances and had some new technology that these designers had not seen. Quickly recognizing the potential of the C3 Network especially when paired with the fast Locust they quickly set to work on a new Draconis variant. The availability of certain industrial facilities and materials along with their lack of others would mark the Dragon’s modernized Locust. This model while sharing some design similarities with its Four-series brethren would also be quite unique. Ultimately, a profitable licensing agreement was concluded between Bergan Industries and Bullrun Concepts that allowed the parent company of the Locust to endure in Kurita space. Buoyed by this contract Bergan opened its latest facility on Dieron in late 3052 to expedite the creation of the LCT-4K. For the time being this new design will consist exclusively of existing Locusts retrofitted at this complex. It is hoped that this burgeoning industry will one day give birth to a dedicated BattleMech factory on planet capable of manufacturing new Locusts for the DCMS.

CAPABILITIES
   With new construction impossible at this time the basis for the 4K continues to be the venerable Bergan VII internal structure. While EndoSteel was unavailable for this overhaul the introduction of the newly produced LTV 160 XL by Bullrun Concepts on Solaris did save a significant amount of mass. This was supplemented by three and a half tons of Durallex Nova Ferro Fibrous manufactured on Quentin. This bulky lostech armor generates nearly the same protection as the original four-ton armored belt did on the original LCT-1V. The inclusion of Double Heat Sinks occupied most of the rest of the unclaimed internal slots in the BattleMech. These ‘freezers’ dissipated all the waste heat generated by movement and weaponry which was composed entirely of lasers. Four Martell Medium Lasers provide limitless short-range firepower which can be pretty substantial. While this offensive punch is impactful it is the sophisticated electronics equipment that makes this BattleMech special. The Garret T10-B communications has been successfully mated with the C3 Slave and Guardian ECM Suite. The proprietary C3 technology allows Draconis units in a lance or company sized network concentrate their attacks. Together with the Electronic Countermeasures, which safeguard friendly C3 transmissions, this Locust can effectively serve as the point ‘Mech for Kurita contingents giving them a powerful edge on the modern battlefield. As this is exclusive technology fielded only by the Combine at this point this design lacks the semi-modular nature of the other Bullrun Four Series Locusts.

DEPLOYMENT
   Initial refits of the LCT-4K Locust were immediately tasked for the light battalions of the Sword of Light units. The 2nd, 5th, and 7th regiments all feature these formations which have now been augmented by active C3 linked lances. Company level organization is proving a bit more difficult but the Dragon has recently prioritized the creation of such units. The next troops which may see the 4K in their ranks maybe the Dieron Regulars who are home to this refit effort. Many of these units are serving as so-call Draconis Irregulars along the Clan Occupation Zone. This informal designation denotes the unprecedented redeployment of District forces from their native lands to the Pesht and Benjamin Military commands. With all the highly sensitive C3 technology involved on this build it is unlikely that any models will be available beyond the Combine’s borders. This is a warning sign to some critics of the Martial Alliance who have condemned the Dragon’s lack of total commitment to the anti-Clan treaty.

Type: LCT-4K Locust
Technology Base: InnerSphere Level 2
Tonnage: 20 tons

Equipment                           Mass
Internal Structure:                         2
Engine:            160 XL             3
   Walking MP:         8
   Running MP:         12
   Jumping MP:         0               0
Heat Sinks:            10 (20)               0
Gyro:                              2
Cockpit:                           3
Armor Factor:            63               3.5

            Internal Structure      Armor Value
   Head            3            8
   Center Torso           6            9 / 2
   R/L Torso         5            8 / 2
   R/L Arm         3            4
   R/L Leg         4            8

Weapons and Ammo:      Location      Criticals   Mass
C3 Slave            Head         1      1
Guardian ECM Suite         Center Torso      2      1.5
2 Medium Lasers         Right Arm      2      2
2 Medium Lasers         Left Arm      2      2

Cost = 3,059,200 C-bills

Ice Hellion · « **Reply #82 on:** February 05, 2022, 03:51:06 PM »

Quote

The proprietary C3 technology allows Draconis units in a lance or company sized network concentrate their attacks.

to concentrate

Quote

The next troops which may see the 4K in their ranks maybe the Dieron Regulars who are home to this refit effort.

may be

Takiro · « **Reply #83 on:** February 06, 2022, 07:49:11 AM »

LCT-4M LOCUST

Mass: 20 tons
Chassis: Corean-II Delux Endo Steel
Power Plant: Hermes 240 XL
Cruising Speed: 130 kph
Maximum Speed: 194 kph, 259 kph w/MASC
Jump Jets: None
Jump Capacity: None
Armor: Kallon FWL Special Ferro Fibrous
Armament: 2 Martell Medium Lasers
   1 Magna Small Laser
Manufacturer: Corean Enterprises
   Primary Factory: Stewart
Communications System: Garret T10-B
Targeting and Tracking System: Corean CalcMaster

OVERVIEW
   While there was significant resistance to invest in any further upgrade to the LCT-3M Locust the drive toward design optimization by the Federated Commonwealth and the subsequent breakdown of order in the Free Worlds League quickly altered that thinking. Focusing on maximizing the speed of this iconic Light ‘Mech the designers at Corean together with renegade ComStar Techs hit upon an engine that was readily available and would dramatically increase the movement profile of the Locust. This upgrade would restore the BattleMech’s traditional place in the Inner Sphere as the fastest around. While schematics were quickly drawn up negotiations to procure necessary components now spread across three separate Provinces proved more complex during the 3rd Marik Civil War. Luckily enough parts were available in order to manufacturer a limited first run which proved to all parties that such an endeavor was in fact highly desirable.

CAPABILITIES
   Largely based off the 3M this new faster Locust shares many of its predecessor’s components. This ranged from older parts like the Martell Medium Laser and the Magna Small Laser as well as myomers and other core electronics to advanced technologies like Corean-II Delux Endo Steel and Kallon FWL Special Ferro Fibrous. While there were minor snags in obtaining consistent supplies for certain items, like the Garret T10-B electronics manufactured in the Dalton system which was under the aegis of Oriente, all components were available. Perhaps the most important of these was the Hermes 240 XL original used on the RFL-5M Rifleman manufactured on Thermopolis. This lostech power plant in production since 3049 had proliferated quickly throughout the Free Worlds League and were obtained relatively easily for this upgrade. Weighing as much as the old LTV 180 Fusion Engine this new reactor enabled the new 4M Locust to walk as quickly as the 1V ran. While a three-ton gyroscope had to replace the older ton model in order to maintain balance this slight increase was considered worth it in order to improve the design. With a maximum speed approaching two hundred kilometers per hour the only thing more impressive was the nearly two hundred and sixty kilometer per hour speed burst provided by its Myomer Accelerator Signal Circuitry. The General Motors MASC-B is made on Irian and is mounted in the center torso to provide the best possible speed for this twenty-ton BattleMech. Each arm is equipped with a Martell Medium Laser and one Magna Small Laser is fitted to the center torso for weaponry. This all-energy arsenal while small and short range does not require reload allowing for extended deployments behind enemy lines. Ten standard Heat Sinks were retained to cope with any waste heat generated from movement and weapons fire. These time-tested devices do an able job in dispersing all such overheating keeping this new Locust cool in battle. Finally, three and a half tons of Kallon FWL Special Ferro Fibrous is a slight improvement over the 3M. This armor protection is very near that of the original LTV-1V which is near maximum for a twenty-ton chassis. Still its best defense against various battlefield threats is its massive speed advantage which now exceeds even the Clan Dasher.

DEPLOYMENT
   First sent to Minister-General Paul Marik’s loyal forces in the 3rd Marik Civil War this new Locust was soon doled out to other friendly supporters. Making technical specs for in the field retrofitting available to certain regional factions who pledged themselves to his daughter’s, Corrine Marik, cause assured their loyalty. One of these worlds was Stewart whose Dragoons were well outfitted as a result of their special relationship to the Marik. Rumors also say that a few also were destined for Wrath of Blake Divisions being assembled in the Marik Commonwealth. This may account for the small number originally destined for Oriente but held up by ‘interstellar shipping issues caused by the Civil War’. Many suspect that Paul is wary of offending the Capellan Chancellor who currently holds Corrine Marik captive somewhere in the Confederation.

Type: LCT-4M Locust
Technology Base: InnerSphere Level 2
Tonnage: 20 tons

Equipment                           Mass
Internal Structure:          EndoSteel            1
Engine:            240 XL            6
   Walking MP:         12
   Running MP:         18 (24)
   Jumping MP:         0               0
Heat Sinks:            10               0
Gyro:                              3
Cockpit:                           3
Armor Factor:            63               3.5

            Internal Structure      Armor Value
   Head            3            8
   Center Torso           6            9 / 2
   R/L Torso         5            8 / 2
   R/L Arm         3            4
   R/L Leg         4            8

Weapons and Ammo:      Location      Criticals   Mass
Small Laser             Center Torso      1      .5
MASC               Center Torso      1      1
Medium Laser            Right Arm      1      1
Medium Laser            Left Arm      1      1

Cost = 3,553,500 C-bills

Ice Hellion · « **Reply #84 on:** February 06, 2022, 12:57:37 PM »

Apart from the Small Laser, it is perfect.

Takiro · « **Reply #85 on:** February 06, 2022, 03:20:43 PM »

Great, I'll make the grammar corrections you guys pointed out and start complying this thing.

Bradshaw · « **Reply #86 on:** February 07, 2022, 12:24:51 PM »

Something that fast, I'd replace small laser with recon camera or remote sensors.

Hominid Mk II · « **Reply #87 on:** February 07, 2022, 10:03:21 PM »

Put me down for the Recon Camera.

Takiro · « **Reply #88 on:** February 08, 2022, 05:18:20 PM »

Which cover do you guys like better?

Hominid Mk II · « **Reply #89 on:** February 08, 2022, 08:06:17 PM »

Number 1.

OBT Forum

News:

Author Topic: Optimizing the Locust! (Read 62298 times)

Takiro

Re: Optimizing the Locust!

Bradshaw

Re: Optimizing the Locust!

Hominid Mk II

Re: Optimizing the Locust!

Ice Hellion

Re: Optimizing the Locust!

Ice Hellion

Re: Optimizing the Locust!

Takiro

Re: Optimizing the Locust!

Takiro

Re: Optimizing the Locust!

Ice Hellion

Re: Optimizing the Locust!

Takiro

Re: Optimizing the Locust!

Ice Hellion

Re: Optimizing the Locust!

Takiro

Re: Optimizing the Locust!

Bradshaw

Re: Optimizing the Locust!

Hominid Mk II

Re: Optimizing the Locust!

Takiro

Re: Optimizing the Locust!

Hominid Mk II

Re: Optimizing the Locust!