OBT Forum
General BattleTech => Dragon Cat Collection => Alternate Universe => TechLab => Topic started by: Dragon Cat on February 28, 2023, 06:27:39 PM
-
A new LAM from my AU
IS-4 Needletail
3114 IS Medium
Source: My Own Custom /
Type/Model: IS-4 Needletail
Tech: Inner Sphere / 3114
Config: Land Air BattleMech
Rules: Level 4, Experimental design
Mass: 45 tons
Chassis:
Power Plant: 225 Fusion
Walking Speed: 54.0 km/h
Running Speed: 86.4 km/h
Jump Jets: 7 Improved Jump Jet
Jump Capacity: 210 meters
Jump Jet Manufacturer:
Armor Type: Standard
Armament:
1 TAG
2 ER Medium Laser
1 MML5
Manufacturer: LexaTech Industries
Location: Irece, Hon Hu
Communications System: Hellion Special 354B
Targeting and Tracking System: Alexis Photon Targeting Acquisition System
==Overview:==
Why break the wheel? Go with what you know. The Needletail produced on Hon Hu by LexaTexh is twice the size of their previous design the Stinger and adds new challenges.
==Capabilities:==
40 tons and a LAM the Needletail used modern weight saving and weaponry to allow it to keep pace with most light Mechs on the ground and out shoot many of them while also being maneuverable in the air. it also has a powerful punch with its Multi Missile Launcher and Medium Lasers while its TAG allows for devastating artillery support.
==Deployment:==
Elite DCMS and DEST units are the only ones to field this Mech.
==Variants:==
Removing a medium laser or smaller missile launcher is common for larger pilots. due to the Modular nature of the MML5 it has led to multiple variants. In Mech mode the Launcher appears above right of head with the Launcher and Ammo encased in a single unit attached to the Mech's back almost like a stinging tail. in Aerospace mode this Launcher appears above the wings precluding the space being used as a bomb bay.
==Battle History:==
While not a battle one of the prototypes of this LAM was stolen by a test pilot and smuggled off world. sources believe this pilot is now working with the Bounty Hunter.
Perk: Modular weapon MML5 Con: cramped Cockpit
---------------------------------------------------------
Type/Model: IS-4 Needletail
Mass: 45 tons
Equipment: Crits Mass
Int. Struct.: 75 pts Composite 0 2.50
Engine: 225 Fusion 6 10.00
Walking MP: 5
Running MP: 8
Jumping MP: 7
AirMech Cruise MP: 21
AirMech Flank MP:31.500000
Fighter Safe Thrust: 7
Fighter Maximum Thrust:10.500000
Structural Integrity: 14
Heat Sinks: 10 Double [20] 3 0.00
Gyro: 4 3.00
Small Cockpit, Life Supt., Sensors: 4 2.00
L: Sh+UA+LA+H R: Sh+UA+LA+H 8 0.00
Armor Factor: 112 Standard 0 7.00
Internal Armor
Structure Value
Head: 3 9
Center Torso: 14 16
Center Torso (Rear): 7
L/R Side Torso: 11 12/12
L/R Side Torso (Rear): 3/3
L/R Arm: 7 10/10
L/R Leg: 11 15/15
Weapons and Equipment Loc Heat Ammo Crits Mass
---------------------------------------------------------
1 TAG HD 0 1 1.00
1 ER Medium Laser LA 5 1 1.00
1 ER Medium Laser RA 5 1 1.00
1 MML5 RT 3 48 5 5.00
(Ammo Locations: 2 RT)
CASE Equipment: RT- 0 1 0.50
1 LAM Conversion Equipment- 0 6 5.00
7 Improved Jump Jets: - 0 14 7.00
(Jump Jet Loc: 1 LL,3 LT,1 RL,2 RT)
---------------------------------------------------------
TOTALS: 13 14 20.50
Crits and Tons Left: 16
Calculated Factors
Total Cost: 9,134,239 C-Bill
Battle Value (BV1):1509
Battle Value (BV2):1350
-
If it Kuritan, why not go for a C3 Slave?
-
If it Kuritan, why not go for a C3 Slave?
The reason for that is... I'm stupid
-
Bit more Kuritan
IS-4A Needletail
3114 IS Medium
Source: My Own Custom /
Type/Model: IS-4A Needletail
Tech: Inner Sphere / 3114
Config: Land Air BattleMech
Rules: Level 4, Experimental design
Mass: 45 tons
Chassis:
Power Plant: 225 Fusion
Walking Speed: 54.0 km/h
Running Speed: 86.4 km/h
Jump Jets: 7 Improved Jump Jet
Jump Capacity: 210 meters
Jump Jet Manufacturer:
Armor Type: Standard
Armament:
2 ER Medium Laser
1 Small Pulse Laser
1 LRM 5
1 C3 Slave Unit
1 TAG
Manufacturer: LexaTech Industries
Location: Irece, Hon Hu
Communications System: Hellion Special 354B
Targeting and Tracking System: Alexis Photon Targeting Acquisition System
==Overview:==
Why break the wheel? Go with what you know. The Needletail produced on Hon Hu by LexaTexh is twice the size of their previous design the Stinger and adds new challenges.
==Capabilities:==
40 tons and a LAM the Needletail used modern weight saving and weaponry to allow it to keep pace with most light Mechs on the ground and out shoot many of them while also being maneuverable in the air. it also has a powerful punch with its Multi Missile Launcher and Medium Lasers while its TAG allows for devastating artillery support.
==Deployment:==
Elite DCMS and DEST units are the only ones to field this Mech.
==Variants:==
Removing a medium laser or smaller missile launcher is common for larger pilots. due to the Modular nature of the MML5 it has led to multiple variants. In Mech mode the Launcher appears above right of head with the Launcher and Ammo encased in a single unit attached to the Mech's back almost like a stinging tail. in Aerospace mode this Launcher appears above the wings precluding the space being used as a bomb bay.
==Battle History:==
While not a battle one of the prototypes of this LAM was stolen by a test pilot and smuggled off world. sources believe this pilot is now working with the Bounty Hunter.
--------------------------------------------------------
Type/Model: IS-4A Needletail
Mass: 45 tons
Equipment: Crits Mass
Int. Struct.: 75 pts Composite 0 2.50
Engine: 225 Fusion 6 10.00
Walking MP: 5
Running MP: 8
Jumping MP: 7
AirMech Cruise MP: 21
AirMech Flank MP:31.500000
Fighter Safe Thrust: 7
Fighter Maximum Thrust:10.500000
Structural Integrity: 14
Heat Sinks: 10 Double [20] 3 0.00
Gyro: 4 3.00
Small Cockpit, Life Supt., Sensors: 4 2.00
L: Sh+UA+LA+H R: Sh+UA+LA+H 8 0.00
Armor Factor: 112 Standard 0 7.00
Internal Armor
Structure Value
Head: 3 9
Center Torso: 14 16
Center Torso (Rear): 7
L/R Side Torso: 11 12/12
L/R Side Torso (Rear): 3/3
L/R Arm: 7 10/10
L/R Leg: 11 15/15
Weapons and Equipment Loc Heat Ammo Crits Mass
---------------------------------------------------------
CASE Equipment: RT- 0 1 0.50
1 LAM Conversion Equipment- 0 6 5.00
1 ER Medium Laser LA 5 1 1.00
1 ER Medium Laser RA 5 1 1.00
1 Small Pulse Laser RT 2 1 1.00
1 LRM 5 RT 2 24 2 3.00
(Ammo Locations: 1 RT)
1 C3 Slave Unit RT 0 1 1.00
1 TAG HD 0 1 1.00
7 Improved Jump Jets: - 0 14 7.00
(Jump Jet Loc: 1 LL,3 LT,1 RL,2 RT)
---------------------------------------------------------
TOTALS: 14 14 20.50
Crits and Tons Left: 17
Calculated Factors
Total Cost: 9,695,026 C-Bill
Battle Value (BV1):1543
BV1 with C3: 1606
Battle Value (BV2):1371
-
The reason for that is... I'm stupid
Not at all.
By the way, you wrote MML in the fluff but in the stats, it is LRM.
-
The reason for that is... I'm stupid
Not at all.
By the way, you wrote MML in the fluff but in the stats, it is LRM.
Yup I didn't play about with fluff when I came up with the Combine variant lol
-
Is this thing designed on HMA or MegaMek Lab?
-
Is this thing designed on HMA or MegaMek Lab?
Neither it was designed in the mobile app Mech Factory
-
I'll have to look that one up!
-
I'll have to look that one up!
It has a few cool features and you can build pretty much any unit with it up to and including WarShips I highly rate it
-
Can you make files that work on MegaMek? I think I'll have try recreate it for wiki, but I'd need to know if there any unique things it may not work.
-
Nope I don't use MegaMek, if it doesn't work I wouldn't stress about it
-
I just found out something that puzzled me about how it works
Removing a medium laser or smaller missile launcher is common for larger pilots
Something the ones in the Vindicator would have loved for sure.
-
I just found out something that puzzled me about how it works
Removing a medium laser or smaller missile launcher is common for larger pilots
Something the ones in the Vindicator would have loved for sure.
I believe I was going with you'd remove a weapon and increase the size of the small cockpit to a larger one but I obviously didn't complete the fluff 😂sorry